NATIONAL SAFETY APPAREL IS SUPPORTING MULTIPLE PPE INITIATIVES TO FIGHT COVID-19. READ MORE HERE.

Aluminized Thermobest Gloves with Reversed Wool Liner

G64TCSR0114

National Safety Apparel’s Thermobest™ Aluminized Gloves with Reversed Wool Liner provides radiant heat and molten metal protection by reflecting the heat back to the source with Aluminized carbon-based fabric. The wool-lined aluminized glove protects against contact heat up to level 5 (25.16 seconds to 2nd degree burn at 600 degrees Fahrenheit. The winged thumb adds dexterity to the glove to hold objects in its palm. Click ‘How to Buy’ to find the right aluminized wool lined glove for you.
Colors:
Stock
Sizes:
14" Length
  • Fabric/Material: 22 oz. Thermobest™
  • Aluminized back provides radiant heat and molten metal protection
  • Winged thumb
  • Made in the USA
  • ANSI/ISEA 105 Heat Level 5
  • ANSI/ISEA 105 Abrasion Level 4
  • ANSI/ISEA 105 Cut Level 5
  • ANSI/ISEA 105 Puncture Level 3
  • READ THE GARMENT LABEL AND LAUNDER PER INSTRUCTIONS ON GARMENT LABEL.
  • DO NOT dry clean or machine wash. DO NOT store garment wet or with any chemical contamination. DO NOT clean with any compounds containing ammonia chlorine, or other oxidizing or abrasive agents.
  • Gently wipe clean with soft cloth and mild soap. Rinse thoroughly . Dry garment by hanging in well vented, shaded area.
  • The outershell of these aluminized garments contains a highly reflective surface and it is extremely important this surface is clean so that it may perform at peak efficiency.
  • Wash according to the instructions above to remove any contaminants in order to maintain fabric performance when garment becomes soiled with dirt, greases, oils, etc.
ANSI/ISEA 105 Heat Level 5 ANSI/ISEA 105 Abrasion Level 4 ANSI/ISEA 105 Cut Level 5 ANSI/ISEA 105 Puncture Level 3

Wool-Lined Aluminized Gloves

Heat resistant gloves that are aluminized protect against contact heat and molten metal splash while reflecting the heat back to the source. When selecting the right high temperature gloves, consider the three potential high heat hazards: molten metal splash, radiant heat and contact heat. The Thermobest Wool-Lined Aluminized Gloves meets ANSI/ISEA 105 Level 5 for protection with its ability to reflect the radiant heat away from your hands in the steel mill, recycling plants, glass plants and other industrial applications.

See all of National Safety Apparel’s high temperature gloves and watch the video below to help select the right thermal PPE gloves for your workers or steel mill, foundry and other heat exposure tasks.

We use cookies to improve your experience on our website. Visit our Privacy Policy to learn more. By continuing to use our site, you agree to our Privacy Policy and to our use of cookies.