Targo Navy Blue FR Foul Weather Jacket

TARGOJACK-NA-_ _

The Targo FR Foul Weather Bomber is lightweight, breathable, and fast drying.
Colors:
Stock
Sizes:
SM-3X
  • Arc Rating: 8.8 cal/cm²
  • CAT 2
  • Fabric/Material: 5.7 oz. 2-Layer GORE-TEX® PYRAD®
  • Lightweight, breathable, and fast drying
  • 100% waterproof and windproof
  • Resists cold cracking in low temperatures
  • Hot liquid and steam resistant
  • Petroleum and oil-based mud resistant
  • Triple trim 1" silver reflective center
  • Hook and loop straps at cuffs
  • Jacket hood sold separately
  • Jacket has zippered chest pocket and two lower hand warmer pockets
  • Jacket has two mic/gas detector tabs
  • Imported
  • Arc Rating: 8.8 cal/cm²
  • CAT 2
  • Compliant to ASTM F1891 for Arc Flash
  • Compliant to ASTM F2733 for Flash Fire
  • Complies with OSHA 1910.269
  • Fabric meets Gas Probe Shirley Method 138:2000, EN 1149-3/2004 & EN 1149-5/2008
  • READ THE GARMENT LABEL AND LAUNDER PER INSTRUCTIONS ON GARMENT LABEL.
  • DO NOT use chlorine bleach or detergents containing bleach. DO NOT use hydrogen peroxide. DO NOT use fabric softeners or dryer sheets. DO NOT dry clean.
  • Wash/Laundering Instructions: Wash separately from other garments. Machine wash warm (max. 120°F/50°C) using mild detergent. Rinse 4 times (adding extra rinse to standard 3-rinse cycle) to remove all soil and detergent residues. Dawn Dish Liquid is recommended for oil based stains. Pre-treat the area, soak for stubborn stains or mild stain treatments may be used. Ensure the product is completely rinsed from the fabric before drying.
  • Drying: Turn garment inside out before drying. Tumble dry using permanent press setting (medium). Tumble drying is recommended to protect garment's water repellent treatment.
  • If contaminants cannot be removed after laundering, it is best to discontinue use of the garment.
Compliant to ASTM F1891 for Arc Flash Compliant to ASTM F2733 for Flash Fire
Made with 7 oz. 2-layer GORE-TEX® PYRAD®, the Targo FR Foul Weather Bomber is not only lightweight and comfortable, it also stands up to any extreme weather conditions. Targo is hot liquid and steam resistant, petroleum and oil-based mud resistant, and flash fire protected. Compliant to ASTM F2733 and ASTM F1891, Targo also meets both ANSI/ISEA 107 and CSA Z96 visibility standards due to the 3M™ Scotchlite™ segmented reflective trim.