HYDROflash FR Foul Weather Jacket - Fluorescent Orange


Made to Order
SM-3X | Other sizes available upon request
  • Arc Rating: 29 cal/cm²
  • CAT 3
  • Fabric/Material: GORE-TEX PYRAD® Polyester on PTFE & DuPont™ Nomex® Knit
  • HYDROFlash FR™ (2 Layer PYRAD) is the lightest weight waterproof, breathable Flash Fire rated garment available
  • Lightweight, breathable, and fast drying
  • 100% waterproof and windproof
  • Resists cold cracking in low temperatures
  • Hot liquid and steam resistant
  • Petroleum and oil-based mud resistant
  • 3M™ Scotchlite™ FR silver segmented reflective trim
  • Hook and loop straps at cuffs
  • Jacket hood sold separately
  • Jacket has zippered chest pocket and two lower hand warmer pockets
  • Jacket has 2 mic/gas detector tabs
  • Made in the USA
  • Arc Rating: 29 cal/cm²
  • CAT 3
  • ANSI/ISEA 107 Type R Class 3
  • CSA Z462
  • ASTM F2733
  • ASTM F1891
  • OSHA 1910.269
  • ASTM F903
  • Gas Probe Shirley Method 138:2000, EN 1149-3/2004 & EN 1149-5/2008
  • DO NOT use bleach or hydrogen peroxide. DO NOT use fabric softeners.
  • Wash/Laundering Instructions: Wash separately from other garments. Machine wash warm (max. 120°F/50°C) using mild detergent. Rinse 4 times (adding extra rinse to standard 3-rinse cycle) to remove all soil and detergent residues. Dawn Dish Liquid is recommended for oil based stains. Pre-treat the area, soak for stubborn stains or mild stain treatments may be used. Ensure the product is completely rinsed from the fabric before drying.
  • Drying: Turn garment inside out before drying. Tumble dry using permanent press setting (medium). Tumble drying is recommended to protect garment's water repellent treatment.
  • Wash according to the instructions above to remove any contaminants in order to maintain fabric performance when garment becomes soiled with dirt, greases, oils, etc.
  • If contaminants cannot be removed after laundering, it is best to discontinue use of garment.
ANSI/ISEA 107 Type R Class 3 CSA Z462 ASTM F2733 ASTM F1891