FR Control 2.0 Balaclava

H85FK

National Safety Apparel’s FR Control 2.0™ Balaclava is made of a breathable, inherently flame resistant modacrylic blend fabric designed to wick moisture away from your body and regulate skin temperature in both hot and cold conditions. The FR Control 2.0 Balaclava will keep you comfortable and dry in any condition. The lightweight hood is perfect for FR daily wear that can be used under a hard hat. Click ‘How to Buy” to find a distributor near you to order.
Colors:
Stock
Sizes:
One Size Fits Most
  • Arc Rating: 4.0 cal/cm²
  • CAT 1
  • Fabric/Material: 5.5 oz. FR CONTROL 2.0™
  • Proactively regulates skin temperature (+/- 3 degrees)
  • Designed to tackle the cold and the heat
  • Reduces perspiration by 34%
  • Superior moisture wicking and dry rate
  • Odor control technology
  • Breathable FR fabric
  • Multiple ways to wear
  • Inherently flame resistant, FR protection will not wash/wear out
  • Stretch for comfort and flexibility to maintain a comfortable work environment
  • FR fabric will not melt, drip, or ignite
  • Lightweight single layer
  • Heat stress reduction
  • Made in the USA
  • Arc Rating: 4.0 cal/cm²
  • CAT 1
  • NFPA 70E
  • CSA Z462
  • ASTM F1506
  • OSHA 1910.269
  • READ THE GARMENT LABEL AND LAUNDER PER INSTRUCTIONS ON GARMENT LABEL.
  • DO NOT use chlorine bleach or detergents containing bleach. DO NOT use fabric softeners. DO NOT iron. DO NOT dry clean.
  • Wash/Laundering Instructions: Machine wash warm. Tumble dry low.
  • Wash according to the instructions above to remove any contaminants in order to maintain fabric performance when garment becomes soiled with dirt, greases, oils, etc.
  • If contaminants cannot be removed after laundering, it is best to discontinue use of garment.
NFPA 70E CSA Z462 ASTM F1506
"

Best FR Balaclavas for Cold Weather and Warm Weather

Comfort is just as important as safety when it comes to arc-rated FR headwear. FR Control 2.0™ technology is designed so that you can wear FR layers that are comfortable in any condition indoors or outdoors. The FR Control 2.0 FR Balaclava proactively regulates your skin temperature in both warm and cold conditions under hard hats, FR hoods and other arc flash PPE headwear +/- 3 degrees. Those are just a few of the qualities that make our FR Control 2.0 Balaclava a great choice for FR daily wear and as an FR base layer. The technology controls your temperature +3 or -3 in either condition and reduces perspiration by as much as 34%, starting as soon as you start perspiring

Inherently Flame Resistant:

The blend of modacrylic fibers make the balaclava inherently flame resistant. This means that it gives you FR head protection that will not wash out, keeping you safe and compliant with NFPA 70E requirements for arc flash and ASTM F1506 for arc flash.

Moisture Wicking:

You can worry about the task at hand while the proactive moisture wicking technology reduces perspiration up to 34% away from your head and face once you begin perspiring. It will absorb the moisture from your head and force it to the exterior of the balaclava.

NFPA 70E Category 1 Base Layer:

The FR balaclava provides you with arc rated head protection of 4 cal/cm2 and meets standards for CSA Z462 for Arc Flash, NFPA 70E for Arc Flash, OSHA 1910.269 and ASTM F1506 for Arc Flash. It helps keep you comfortable, cool or warm, safe and compliant.

FR Base Layers:

FR Control 2.0 is used in a number of National Safety Apparel FR base layers like the Neck Gaiter, Ninja Balaclava and Long Sleeve T-Shirts. National Safety Apparel has you covered with everything you need to know about the important of FR winter head protection. "