cutGUARD K5 Pullover Jacket
- Fabric/Material: 13 oz. K5 HPPE Blend Knit
- Lightweight and breathable
- Double layer stand-up collar lined with soft knit for comfort
- Double layer cuff with inset knit wrist
- Thumbhole keeps sleeve in place
- Drop shoulder seams for extra comfort
- Available with mesh back (mesh offers no mechanical protection)
- Available with enhanced visibility trim
- Made in the USA
- ASTM F2992 Cut Level A3 (Black Knit Wrist and Back Neck)
- EN 388 Puncture Level 5
- ANSI/ISEA 105-16
- ASTM D3884 Abrasion Level 3
- ASTM F1790-97
- ASTM F2992 Cut Level A5 (Sleeves/Body)
- ASTM F2992 Cut Level A7 (Cuffs/Collar)
- READ THE GARMENT LABEL AND LAUNDER PER INSTRUCTIONS ON GARMENT LABEL.
- DO NOT use chlorine bleach or detergents containing bleach. DO NOT use fabric softeners. DO NOT iron. DO NOT dry clean.
- Wash/Laundering Instructions: Machine wash cold. Tumble dry no heat. To minimize shrinkage, do not over dry.
- Wash according to the instructions above to remove any contaminants in order to maintain fabric performance when garment becomes soiled with dirt, greases, oils, etc.
- If contaminants cannot be removed after laundering, it is best to discontinue use of garment.