12 Cal PureView Arc Flash Faceshield with Slotted Adapter


This arc flash face shield with hard hat provides PPE Cat Level 2 protection with a 12 cal/cm2 ATPV. The PureView™ face shield delivers enhanced visibility and the slotted adapted makes this 12 cal adjustable face shield flexible for users to set the shield in different positions. Get arc flash face protection with greater visibility and flexibility with this 12 cal adjustable arc flash face shield. Click How to Buy to find a distributor.
One Size Fits Most
  • Arc Rating: 12 cal/cm²
  • CAT 2
  • Fabric/Material: Plastic
  • Hard hat is included
  • Highly transparent arc flash faceshield with slotted adapter for greater range visibility
  • Low profile chin cup
  • Standard anti-fog/scratch resistant coating
  • Adjustable settings allow the faceshield to be secured in various positions
  • Lightweight design
  • HLITEKIT sold separately
  • Made in the USA
  • Arc Rating: 12 cal/cm²
  • CAT 2
  • NFPA 70E
  • CSA Z462
  • ASTM F2178
  • OSHA 1910.269
  • ANSI/ISEA Z87.1 (Impact Rating Z81+)
  • DO NOT use ammonia based cleaners. DO NOT use any abrasives or polishes. NEVER use if cracked or broken.
  • Remove from hood if applicable. Wash with warm soapy water. Mild soap only. Rinse thoroughly. Pat dry with a soft cloth.
  • Always transport and store your faceshield, goggles, and glasses in a soft cloth bag to minize wear & tear.
  • Wash according to the instructions above to remove any contaminants in order to maintain performance when garment becomes soiled with dirt, greases, oils, etc.
  • If contaminants cannot be removed after laundering, it is best to discontinue use of garment.
NFPA 70E CSA Z462 ASTM F2178

Adjustable Arc Flash Face Shield

The PureView arc flash face shield provides a transparent alternative for arc flash face shields to improve range of color visibility for safety. In addition to the new technology the 12 cal PureView Faceshield with Hard Hat includes the slotted adapted to make it an adjustable arc flash shield. The adapter on the shield allows electrical workers and other industries where workers are exposed to arc flash hazards to comfortably adjust the position of the face shield when not in use or exposed to risk. The adapter even allows the arc flash shield to be adjusted above the hard hat. The face shield is compliant with NFPA 70E and ANSI/ISEA Z87.1-2017. The clear plastic chin cup expands the field of view and provides additional protection in the event of an arc flash.   

Learn more about National Safety Apparel’s PureView™ Faceshields for enhanced arc flash head protection safety and comfort.

We use cookies to improve your experience on our website. Visit our Privacy Policy to learn more. By continuing to use our site, you agree to our Privacy Policy and to our use of cookies.